Impellers

Speck Pumps Impeller Closed face impeller made for the model 433 In-ground and Commercial Pool Pump by Speck. Rated at 3.0hp, this impeller is used in a model 433 pump body and must be installed on a 3.0hp C-face motor with a threaded shaft. The motor...

Speck Pumps Impeller Closed face impeller made for the model 433 In-ground and Commercial Pool Pump by Speck. Rated at 2.5hp, this impeller is used in a model 433 pump body and must be installed on a 2.5hp C-face motor with a threaded shaft. The motor...

Speck Pumps Impeller Closed face impeller made for the model 433 In-ground and Commercial Pool Pump by Speck. Rated at 2.0hp, this impeller is used in a model 433 pump body and must be installed on a 2.0hp C-face motor with a threaded shaft. The motor...

Speck Pumps Impeller Closed face impeller made for the model 433 In-ground and Commercial Pool Pump by Speck. Rated at 1.5hp, this impeller is used in a model 433 pump body and must be installed on a 1.5hp C-face motor with a threaded shaft. The motor...

Speck Pumps Impeller Closed face impeller made for the model 433 In-ground and Commercial Pool Pump by Speck. Rated at 1.0hp, this impeller is used in a model 433 pump body and must be installed on a 1.0hp C-face motor with a threaded shaft. The motor...

Speck Pumps Impeller Closed face impeller made for the model 21-80 G/GS/BS Water Feature Pumps by Speck. Rated at 6.0hp, this impeller is used in a model 21-80/30 G pump wet end and must be installed on a 6.0hp (or greater) motor. Shaft seal sold...

Speck Pumps Impeller Closed face impeller made for the model 21-80 G Water Feature Pump by Speck. Rated at 1/2hp, this impeller is used in a model 21-80/30 G pump wet end and must be installed on a 1/2hp (or greater) motor. Shaft seal sold separately

Speck Pumps Impeller Closed face impeller made for the EasyFit Universal Replacement Pump by Speck. Rated at 1.65hp, this impeller is used in an EasyFit pump body and must be installed on a 1.65hp (or greater) motor. The motor may be single or dual speed...

Speck Pumps Impeller Closed face impeller made for the Badu EcoMV3 In-ground Pool Pump by Speck. Rated at 1.0hp, this impeller is used in a EcoM3 pump body and installed on a variable speed motor. Shaft seal sold separately

Speck Pumps Impeller Closed face impeller made for the Badu EcoM2 and S90 In-ground and Commercial Pool Pumps by Speck. Rated at 1.0hp, this impeller is used in a S90/EcoM2 pump body and must be installed on a 1.0hp (or greater) C-face motor with a...

Speck Pumps Impeller Closed face impeller made for the 72 model and Badu EcoMV In-ground and Commercial Pool Pumps by Speck. Rated at 3.5hp, this impeller is used in a 72/EcoMV pump body and must be installed on a 3.5hp (or greater) C-face motor with a...

Speck Pumps Impeller Closed face impeller made for the 72 model and Badu EcoMV In-ground and Commercial Pool Pumps by Speck. Rated at 2.5hp, this impeller is used in a 72/EcoMV pump body and must be installed on a 2.5hp (or greater) C-face motor with a...

Speck Pumps Impeller Closed face impeller made for the 72 model and Badu EcoMV In-ground and Commercial Pool Pumps by Speck. Rated at 2.0hp, this impeller is used in a 72/EcoMV pump body and must be installed on a 2.0hp (or greater) C-face motor with a...

Purex/Pentair Pump Impeller Closed face impeller made for the Triton Whisterflo Pool Pump by Purex/Pentair. Rated at 3/4hp, this impeller is used in a Whisperflo pump body and must be installed on a 3/4hp (or greater) square flange motor. Shaft seal...

Purex/Pentair Pump Impeller Closed face impeller made for the Triton Whisterflo Pool Pump by Purex/Pentair. Rated at 3.0hp, this impeller is used in a Whisperflo pump body and must be installed on a 3.0hp (or greater) square flange motor. Also used in...

Purex/Pentair Pump Impeller Closed face impeller made for the Triton Whisterflo Pool Pump by Purex/Pentair. Rated at 2.0hp, this impeller is used in a Whisperflo pump body and must be installed on a 2.0hp (or greater) square flange motor. Shaft seal...

Purex/Pentair Pump Impeller Closed face impeller made for the Triton Whisterflo Pool Pump by Purex/Pentair. Rated at 1/2hp, this impeller is used in a Whisperflo pump body and must be installed on a 1/2hp (or greater) square flange motor. Shaft seal...

Purex/Pentair Pump Impeller Closed face impeller made for the Triton Whisterflo Pool Pump by Purex/Pentair. Rated at 1.5hp, this impeller is used in a Whisperflo pump body and must be installed on a 1.5hp (or greater) square flange motor. Shaft seal...

Purex/Pentair Pump Impeller Closed face impeller made for the Triton Whisterflo Pool Pump by Purex/Pentair. Rated at 1.0hp, this impeller is used in a Whisperflo pump body and must be installed on a 1.0hp (or greater) square flange motor. Shaft seal...

Polaris/Zodiac Pump Impeller Closed face impeller made for the Halcyon Booster Pump by Polaris/Zodiac. It is used exclusively in the Polaris Halcyon model PB4-60Q Booster pump volute and installed on a 3/4hp motor. Shaft seal sold separately

DISCONTINUED - see 400015Z Pentair Pump Impeller Closed face impeller made for the IntelliFlo XF series Pool Pump by Pentair. Rated at 3.0hp, it is used with a IntelliFlo XF trap body and must be installed on the Pentair/Purex Variable Speed square...

PacFab/Pentair Pump Impeller Open face impeller made for the Hydro Pool Pump by PacFab/Pentair. Rated at 3/4hp, it is used in the Hydro pump body, and must be installed on a 3/4hp (or greater) C-face motor with a keyed shaft. Shaft seal sold separately

PacFab/Pentair Pump Impeller Open face impeller made for the Hydro Pool Pump by PacFab/Pentair. Rated at 3.0hp, it is used in the Hydro pump body, and must be installed on a 3.0hp (or greater) C-face motor with a keyed shaft. Shaft seal sold separately

PacFab/Pentair Pump Impeller Open face impeller made for the Hydro Pool Pump by PacFab/Pentair. Rated at 2.0hp, it is used in the Hydro pump body, and must be installed on a 2.0hp (or greater) C-face motor with a keyed shaft. Shaft seal sold separately

PacFab/Pentair Pump Impeller Open face impeller made for the Hydro Pool Pump by PacFab/Pentair. Rated at 1/2hp, it is used in the Hydro pump body, and must be installed on a 1/2hp (or greater) C-face motor with a keyed shaft. Shaft seal sold separately

PacFab/Pentair Pump Impeller Open face impeller made for the Hydro Pool Pump by PacFab/Pentair. Rated at 1.5hp, it is used in the Hydro pump body, and must be installed on a 1.5hp (or greater) C-face motor with a keyed shaft. Shaft seal sold separately

PacFab/Pentair Pump Impeller Open face impeller made for the Hydro Pool Pump by PacFab/Pentair. Rated at 1.0hp, it is used in the Hydro pump body, and must be installed on a 1.0hp (or greater) C-face motor with a keyed shaft. Shaft seal sold separately

PacFab/Pentair Pump Impeller Closed face impeller made for the Dynamo Pool Pump by PacFab/Pentair. Rated at 3/4hp, it is used in the Dynamo pump body, and must be installed on a 3/4hp (or greater) thru bolt motor. Shaft seal sold separately

PacFab/Pentair Pump Impeller Closed face impeller made for the Dynamo Pool Pump by PacFab/Pentair. Rated at 1.0hp, it is used in the Dynamo pump body, and must be installed on a 1.0hp (or greater) thru bolt motor. Shaft seal sold separately

PacFab/Pentair Pump Impeller Closed face impeller made for the Challenger series Pool Pump by PacFab/Pentair. Rated at 2.0hp, it is used with a Challenger pump volute and must be installed on a 2.0hp (or greater) square flange motor. Also used in the...

PacFab/Pentair Pump Impeller Closed face impeller made for the Challenger series Pool Pump by PacFab/Pentair. Rated at 1.5hp, it is used with a Challenger pump volute and must be installed on a 1.5hp (or greater) square flange motor. Also used in the...

PacFab/Pentair Pump Impeller Closed face impeller made for the Challenger Pool Pump by PacFab/Pentair. Rated at 3/4hp, it is used in the Challenger high pressure pump body, and must be installed on a 3/4hp (or greater) square flange motor. Also used in...

PacFab/Pentair Pump Impeller Closed face impeller made for the Challenger Pool Pump by PacFab/Pentair. Rated at 1/2hp, it is used in the Challenger high pressure pump body, and must be installed on a 1/2hp (or greater) square flange motor. Also used in...

PacFab/Pentair Pump Impeller Closed face impeller made for the Challenger Pool Pump by PacFab/Pentair. Rated at 1.0hp, it is used in the Challenger high pressure pump body, and must be installed on a 1.0hp (or greater) square flange motor. Also used in...

PacFab/Pentair Pump Impeller Closed face impeller made for the Challenger High Pressure Pool Pump by PacFab/Pentair. Rated at 3/4hp, it is used in the Challenger high pressure pump body, and must be installed on a 3/4hp (or greater) square flange motor. ...

PacFab/Pentair Pump Impeller Closed face impeller made for the Challenger High Pressure Pool Pump by PacFab/Pentair. Rated at 3.0hp, it is used in the Challenger high pressure pump body, and must be installed on a 3.0hp (or greater) square flange motor. ...

PacFab/Pentair Pump Impeller Closed face impeller made for the Challenger High Pressure Pool Pump by PacFab/Pentair. Rated at 2.0hp, it is used in the Challenger high pressure pump body, and must be installed on a 2.0hp (or greater) square flange motor. ...

PacFab/Pentair Pump Impeller Closed face impeller made for the Challenger High Pressure Pool Pump by PacFab/Pentair. Rated at 1/2hp, it is used in the Challenger high pressure pump body, and must be installed on a 1/2hp (or greater) square flange motor. ...

PacFab/Pentair Pump Impeller Closed face impeller made for the Challenger High Pressure Pool Pump by PacFab/Pentair. Rated at 1.5hp, it is used in the Challenger high pressure pump body, and must be installed on a 1.5hp (or greater) square flange motor. ...

PacFab/Pentair Pump Impeller Closed face impeller made for the Challenger High Pressure Pool Pump by PacFab/Pentair. Rated at 1.0hp, it is used in the Challenger high pressure pump body, and must be installed on a 1.0hp (or greater) square flange motor. ...