Impellers

Impellers

Swimming pool pump impellers for inground and above ground pool pumps.

  • On Sale
    Impeller Waterway Workman 3 HP Impeller Waterway Workman 3 HP at a different angle again.

    Waterway

    Impeller Waterway Workman 3 HP 310-1060

    Now: $26.72
    Was: $47.29
    Waterway Workman Pump ImpellerClosed face impeller made for the Workman above ground pump by Waterway Plastics. Rated at 3.0hp, this pump impeller is used in a Waterway Workman pump wet end and should be installed on a 3.0 HP (or greater) thru bolt motor...
  • On Sale
    Impeller Waterway Workman 1HP Impeller Waterway Workman 1HP at a different angle

    Waterway

    Impeller Waterway Workman 1HP 310-1031

    Now: $25.79
    Was: $33.00
    Waterway Workman Pump ImpellerClosed face impeller made for the Workman above ground pump by Waterway Plastics. This 1 HP impeller is used in a Waterway Workman pump wetend and should be installed on a 1.0 HP (or greater) thru bolt motor. Shaft seal sold...
  • On Sale
    Impeller Waterway Viper 5 HP Impeller Waterway Viper 5 HP at a different angle

    Waterway

    Impeller Waterway Viper 5 HP 310-2280

    Now: $25.91
    Was: $45.86
    Waterway Viper Pump ImpellerClosed face impeller made for the Viper pump by Waterway Plastics.This impeller is rated at5.0hp, it is used in a Waterway Viper pump wetend, and should be installed on a 5.0hp (or greater) thru bolt motor. Shaft seal sold...
  • On Sale
    Impeller Waterway Viper 4 HP Impeller Waterway Viper 4 HP at a different angle again.

    Waterway

    Impeller Waterway Viper 4 HP 310-2200

    Now: $27.46
    Was: $48.62
    Waterway Viper Pump ImpellerClosed face impeller made for the Viper pump by Waterway Plastics.This impeller is rated at4.0hp, it is used in a Waterway Viper pump wetend, and should be installed on a 4.0hp (or greater) thru bolt motor. Shaft seal sold...
  • On Sale
    Impeller Waterway Viper 3 HP

    Waterway

    Impeller Waterway Viper 3 HP 310-2270

    Now: $27.46
    Was: $48.62
    Waterway Viper Pump ImpellerClosed face impeller made for the Viper pump by Waterway Plastics.This impeller is rated at3.0hp, it is used in a Waterway Viper pump wetend, and should be installed on a 3.0hp (or greater) thru bolt motor. Shaft seal sold...
  • On Sale
    Impeller Waterway Viper 2.5 HP Impeller Waterway Viper 2.5 HP at a different angle

    Waterway

    Impeller Waterway Viper 2.5 HP 310-2620

    Now: $25.51
    Was: $45.16
    Waterway Viper Pump ImpellerClosed face impeller made for the Viper pump by Waterway Plastics.This impeller is rated at2.5hp/3.0hp, it is used in a Waterway Viper pump wetend, and should be installed on a 2.5hp (or greater) thru bolt motor. Shaft seal...
  • On Sale
    Impeller Waterway Svl56 3 HP

    Waterway

    Impeller Waterway Svl56 3 HP 310-3680

    Now: $43.44
    Was: $76.88
    Waterway SVL56 Pump ImpellerClosed face impeller made for the SVL56 pump by Waterway Plastics.This impeller is rated at3.0hp, it is used in a Waterway SVL56 Pool pump body, and must be installed on a 3.0hp (or greater) square flange motor with a threaded...
  • On Sale
    Impeller Waterway Svl56 2 HP Impeller Waterway Svl56 2 HP at a different angle

    Waterway

    Impeller Waterway Svl56 2 HP 310-3670

    Now: $41.26
    Was: $73.03
    Waterway SVL56 Pump ImpellerClosed face impeller made for the SVL56 pump by Waterway Plastics.This impeller is rated at2.0hp, it is used in a Waterway SVL56 Pool pump body, and must be installed on a 2.0hp (or greater) square flange motor with a threaded...
  • On Sale
    Impeller Waterway Svl56 1.5 HP Impeller Waterway Svl56 1.5 HP at a different angle

    Waterway

    Impeller Waterway Svl56 1.5 HP 310-3660

    Now: $43.44
    Was: $76.88
    Waterway SVL56 Pump ImpellerClosed face impeller made for the SVL56 pump by Waterway Plastics.This impeller is rated at1.5hp, it is used in a Waterway SVL56 Pool pump body, and must be installed on a 1.5hp (or greater) square flange motor with a threaded...
  • On Sale
    Impeller Waterway Svl56 1 Hp Impeller Waterway Svl56 1 Hp at a different angle

    Waterway

    Impeller Waterway Svl56 1 Hp 310-3650

    Now: $43.44
    Was: $76.88
    Waterway SVL56 Pump ImpellerClosed face impeller made for the SVL56 pool pump by Waterway Plastics.This impeller is rated at1.0hp, it is used in a Waterway SVL56 pool pump body, and must be installed on a 1.0hp (or greater) square flange motor with a...
  • On Sale
    Impeller Waterway Supreme 0.75 HP

    Waterway

    Impeller Waterway Supreme 0.75 HP 310-5080

    Now: $24.47
    Was: $43.32
    Waterway Supreme Pump ImpellerClosed face impeller made for the Supreme above ground pump by Waterway Plastics.This impeller is rated at3/4hp, it is used in a Waterway Supreme pump wetend, and must be installed on a 3/4hp (or greater) thru bolt motor...
  • On Sale
    Impeller Waterway Supreme 1.5 HP Impeller Waterway Supreme 1.5 HP at a different angle

    Waterway

    Impeller Waterway Supreme 1.5 HP 310-5100

    Now: $24.47
    Was: $43.32
    Waterway Supreme Pump ImpellerClosed face impeller made for the Supreme above ground pump by Waterway Plastics.This impeller is rated at1.5hp, it is used in a Waterway Supreme pump wetend, and must be installed on a 1.5hp (or greater) thru bolt motor...
  • On Sale
    Impeller Waterway Supreme 1 Hp

    Waterway

    Impeller Waterway Supreme 1 Hp 310-5090

    Now: $24.47
    Was: $43.32
    Waterway Supreme Pump ImpellerClosed face impeller made for the Supreme above ground pump by Waterway Plastics.This impeller is rated at1.0hp, it is used in a Waterway Supreme pump wetend, and must be installed on a 1.0hp (or greater) thru bolt motor...
  • On Sale
    Impeller Waterway Hiflo Side Discharge 4 HP Impeller Waterway Hiflo Side Discharge 4 HP at a different angle

    Waterway

    Impeller Waterway Hiflo Side Discharge 4 HP 310-4050

    Now: $23.88
    Was: $42.28
    Waterway HiFlo Pump ImpellerClosed face impeller made for the HiFlo side discharge pump by Waterway Plastics. Rated at 4.0hp, it is used in a Waterway HiFlo pump wetend, and must be installed on a 4.0hp (or greater) thru bolt motor. Shaft seal sold...
  • On Sale
    Impeller Waterway Hiflo Side Discharge 3 HP Impeller Waterway Hiflo Side Discharge 3 HP at a different angle

    Waterway

    Impeller Waterway Hiflo Side Discharge 3 HP 310-4020

    Now: $23.88
    Was: $42.28
    Waterway HiFlo Pump ImpellerClosed face impeller made for the HiFlo side discharge pump by Waterway Plastics. Rated at 3.0hp, it is used in a Waterway HiFlo pump wetend, and must be installed on a 3.0hp (or greater) thru bolt motor. Shaft seal sold...
  • On Sale
    Impeller Waterway Hiflo Side Discharge 2 HP Impeller Waterway Hiflo Side Discharge 2 HP at a different angle

    Waterway

    Impeller Waterway Hiflo Side Discharge 2 HP 310-4030

    Now: $23.88
    Was: $42.28
    Waterway HiFlo Pump ImpellerClosed face impeller made for the HiFlo side discharge pump by Waterway Plastics. Rated at 2.0hp, it is used in a Waterway HiFlo pump wetend, and must be installed on a 2.0hp (or greater) thru bolt motor. Shaft seal sold...
  • On Sale
    Impeller Waterway Hiflo Side Discharge 1 Hp

    Waterway

    Impeller Waterway Hiflo Side Discharge 1 Hp 310-4000

    Now: $23.88
    Was: $42.28
    Waterway HiFlo Pump ImpellerClosed face impeller made for the HiFlo side discharge pump by Waterway Plastics. Rated at 1.0hp, it is used in a Waterway HiFlo pump wetend, and must be installed on a 1.0hp (or greater) thru bolt motor. Shaft seal sold...
  • On Sale
    Impeller Waterway Executive 5 HP New Style Impeller Waterway Executive 5 HP New Style at a different angle

    Waterway

    Impeller Waterway Executive 5 HP New Style 310-4180

    Now: $21.98
    Was: $38.90
    Waterway Executive Pump ImpellerClosed face impeller made for the Executive pump by Waterway Plastics. Rated at 5.0hp, it is used in a Waterway Executive pump wetend, and must be installed on a 5.0hp (or greater) thru bolt motor. Shaft seal sold...
  • On Sale
    Impeller Waterway Executive 4 HP New Style Impeller Waterway Executive 4 HP New Style at a different angle

    Waterway

    Impeller Waterway Executive 4 HP New Style 310-4190

    Now: $21.98
    Was: $38.90
    Waterway Executive Pump ImpellerClosed face impeller made for the Executive pump by Waterway Plastics. Rated at 4.0hp, it is used in a Waterway Executive pump wetend, and must be installed on a 4.0hp (or greater) thru bolt motor. Shaft seal sold...
  • On Sale
    Impeller Waterway Executive 0.75 HP Impeller Waterway Executive 0.75 HP at a different angle

    Waterway

    Impeller Waterway Executive 0.75 HP 310-4230

    Now: $26.10
    Was: $46.20
    Waterway Executive Pump ImpellerClosed face impeller made for the Executive pump by Waterway Plastics. Rated at 3/4hp, it is used in a Waterway Executive pump wetend, and must be installed on a 3/4hp (or greater) thru bolt motor. Shaft seal sold...
  • On Sale
    Impeller Waterway Ex2 3 HP Impeller Waterway Ex2 3 HP at a different angle again.

    Waterway

    Impeller Waterway Ex2 3 HP 310-2350

    Now: $27.46
    Was: $48.62
    Waterway EX2 Pump ImpellerClosed face impeller made for the EX2 pump by Waterway Plastics. Rated at 3.0hp, it is used in a Waterway EX2 pump wetend, and must be installed on a 3.0hp (or greater) thru bolt motor. Shaft seal sold separately
  • On Sale
    Impeller Waterway Ex2 2.5 HP Impeller Waterway Ex2 2.5 HP at a different angle again.

    Waterway

    Impeller Waterway Ex2 2.5 HP 310-2300

    Now: $26.03
    Was: $46.07
    Waterway EX2 Pump ImpellerClosed face impeller made for the EX2 pump by Waterway Plastics. Rated at 2.5hp, it is used in a Waterway EX2 pump wetend, and must be installed on a 2.5hp (or greater) thru bolt motor. Shaft seal sold separately
  • On Sale
    Impeller Waterway Ex2 2 HP Impeller Waterway Ex2 2 HP at a different angle again.

    Waterway

    Impeller Waterway Ex2 2 HP 310-2340

    Now: $27.46
    Was: $48.62
    Waterway EX2 Pump ImpellerClosed face impeller made for the EX2 pump by Waterway Plastics. Rated at 2.0hp, it is used in a Waterway EX2 pump wetend, and must be installed on a 2.0hp (or greater) thru bolt motor. Shaft seal sold separately
  • On Sale
    Impeller Waterway Ex2 1.5 HP Impeller Waterway Ex2 1.5 HP at a different angle

    Waterway

    Impeller Waterway Ex2 1.5 HP 310-2330

    Now: $27.46
    Was: $48.62
    Waterway EX2 Pump ImpellerClosed face impeller made for the EX2 pump by Waterway Plastics. Rated at 1.5hp, it is used in a Waterway EX2 pump wetend, and must be installed on a 1.5hp (or greater) thru bolt motor. Shaft seal sold separately
  • On Sale
    Impeller Waterco SupaTuf 0.75 HP Impeller Waterco SupaTuf 0.75 HP at a different angle

    Waterco

    Impeller Waterco SupaTuf 0.75 HP WC635005

    Now: $31.07
    Was: $35.13
    Waterco SupaTuf Pump ImpellerClosed face impeller made for the SupaTuf self priming in-ground pool pump by Waterco. Rated at 3/4hp, it is used in a SupaTuf pool pump body, and must be installed on a 3/4hp (or greater) square flange motor with a threaded...
  • On Sale
    Impeller Waterco SupaTuf 2 HP Impeller Waterco SupaTuf 2 HP at a different angle

    Waterco

    Impeller Waterco SupaTuf 2 HP WC635013

    Now: $36.91
    Was: $65.34
    Waterco SupaTuf Pump ImpellerClosed face impeller made for the SupaTuf self priming in-ground pool pump by Waterco. Rated at 2.0hp, it is used in a SupaTuf pool pump body, and must be installed on a 2.0hp (or greater) square flange motor with a threaded...
  • On Sale
    Impeller Waterco SupaTuf 1.5 HP Impeller Waterco SupaTuf 1.5 HP at a different angle

    Waterco

    Impeller Waterco SupaTuf 1.5 HP WC635008

    Now: $39.92
    Was: $70.67
    Waterco SupaTuf Pump ImpellerClosed face impeller made for the SupaTuf self priming in-ground pool pump by Waterco. Rated at 1.5hp, it is used in a SupaTuf pool pump body, and must be installed on a 1.5hp (or greater) square flange motor with a threaded...
  • On Sale
    Impeller Waterco SupaStream 2 HP Impeller Waterco SupaStream 2 HP at a different angle

    Waterco

    Impeller Waterco SupaStream 2 HP WC635099

    Now: $32.37
    Was: $42.22
    Waterco SupaStream Pump ImpellerClosed face impeller made for the SupaStream self priming in-ground pool pump by Waterco. Rated at 2.0hp, it is used in a SupaStream pool pump body, and must be installed on a 2.0hp (or greater) square flange motor with a...
  • On Sale
    Impeller Waterco SupaStream 1.5 HP Impeller Waterco SupaStream 1.5 HP at a different angle

    Waterco

    Impeller Waterco SupaStream 1.5 HP WC635098

    Now: $40.42
    Was: $71.55
    Waterco SupaStream Pump ImpellerClosed face impeller made for the SupaStream self priming in-ground pool pump by Waterco. Rated at 1.5hp, it is used in a SupaStream pool pump body, and must be installed on a 1.5hp (or greater) square flange motor with a...
  • On Sale
    Impeller Waterco SupaStream 1 Hp Impeller Waterco SupaStream 1 Hp at a different angle

    Waterco

    Impeller Waterco SupaStream 1 Hp WC635097

    Now: $40.42
    Was: $71.55
    Waterco SupaStream Pump ImpellerClosed face impeller made for the SupaStream self priming in-ground pool pump by Waterco. Rated at 1.0hp, it is used in a SupaStream pool pump body, and must be installed on a 1.0hp (or greater) square flange motor with a...